Caple C816C Instruction Manual Download Page 9

Instruction manual C816C

Instruction manual C816C

16

17

Please keep this instruction manual for future reference 

Please keep this instruction manual for future reference 

S E T T I N G  T H E  T I M E R  TO  T U R N   O N E   O R   M O R E   C O O K I N G   Z O N E S   O F F

NOTE:

  

If you want to change the time after the timer is set, you have to start from step 1.

T I M E R   C O N T R O L

You can use the timer in two different ways:

 ›  You can use it as a minute minder. In this case, the timer will not turn any cooking zone off 

when the set time is up.

 ›  You can set it to turn one or more cooking zones off after the set time is up.  

The timer maximum is 99 minutes.

U S I N G   T H E   T I M E R   A S   A   M I N U T E   M I N D E R ,   

W H E N  YO U  A R E   N OT   S E L E C T I N G  A N Y   C O O K I N G   Z O N E

Make sure the hob is turned on.

Note: you can use the minute minder even if you’re 
not selecting any cooking zone.

Touch the   or   controls of the timer. The minute 
minder indicator will flash.

Set the time by touching the   or   control of the 
timer: Touch the   or   control of the timer once to 
decrease or increase the time by 1 minute.

Touch and hold the   or   control of the timer to 
decrease or increase the time by 10 minutes.  
If the setting time exceeds 99 minutes, the timer will 
automatically return to 0.
If you touch the   and   together, the timer will be 
cancelled, and “-- “ will show in the minute display.

When the time is set, it will begin to count down 
immediately. The display will show the remaining 
time and the timer indicator will flash for 5 seconds.

A buzzer will sound for 30 seconds and the timer 
indicator shows “- - “ when the set time has 
finished.

U S I N G   T H E   T I M E R   A S   A   M I N U T E   M I N D E R ,   

W H E N  YO U  A R E   N OT   S E L E C T I N G  A N Y   C O O K I N G   Z O N E

Touch the   or   power setting for the 
corresponding cooking zone you want to set the 
timer for.

Set the time by touching the control for the timer

If you touch the   or   control of the timer once, 
the time will decrease or increase by 1 minute.

If you touch the   and   together, this will cancel 
the timer and it will display ” --” in the minute 
display.

If you touch the   and   together, this will cancel 
the timer and it will display ” --” in the minute 
display.

When the time is set, it will begin to count down 
immediately. The display will show the remaining 
time and the timer indicator will flash for 5 seconds.

The red dot next to the power level indicator will 
illuminate, indicating that zone is selected.

When the cooking timer expires, the corresponding 
cooking zone will switch off automatically.

Summary of Contents for C816C
















Reviews: