- 18 -
USE
Use the touch control system in the corresponding
position relative to the individual cooking needs. Keep in
mind that the higher the number, the more heat that it is
produced.
FUNCTIONING
- On the basis of the model you own, the appliance can
be switched on by actuating the start-up sensor (Fig.4-
5-6-7-8
A
). One zero will appear on all displays within10
seconds. If no display is actuated within 10 seconds, the
top will switch off again.
- Press selection key
F
for the desired cooking area.
A luminous "0" will appear on the respective display with
a decimal point to indicate which cooking area is active.
- A hotplate may be switched on by activating the "
+
" or
"
-
" sensor within 10 seconds. If sensor
D
is used, the
display will show selection 9, while if sensor
C
is used,
the display shows selection 1 or 5, depending on the
model.
- Once this operation has been performed choose the
temperature adjustment with the
"+"
or
"-"
keys.
- The plate can be switched off by selecting "0" with the
D sensor, after 3 seconds the cooking area is
automatically switched off.
It is always possible to switch a plate off by touching the
"+"
and
"-"
sensors at the same time.
- The cooking top can be switched off by touching the
main start-up sensor (Fig.4-5-6-7-8
A
). If all the plates
are selected on "0" the top will switch off after 10 seconds.
-If the top is equipped with plates with an extension (fig.5-
7-8) switching on of the second area will be carried out
after having checked that :
- the key button LED (fig.5-7-8 B) is off, otherwise de-
insert it.
- Press the key (fig.5-7-8
A
) to switch the top on.
- Choose the desired plate and adjust the power using
the
"+"
or
"-"
keys.
-Once the power has been adjusted choose the key (fig.5-
7-8
L
) to activate the double area.
- To deactivate the double area check that the interested
plate has been selected (fig.5-7-8
F
) and press the key
(fig.5-7-8
L
) .
Note:
the Double area function is activated only on plates
F1
and
F2
(fig.5-7-8 ).
- If an object is placed above the controls, the cooking
top will automatically move to the
OFF
position.
When a plate is in the
OFF
position and the temperature
is higher than 50° there will be a luminous signal "
H
"
near to the respective selection key (Fig.4- 5- 6-7-8
H
).
- the
B
function blocks the functioning of the top on
selection. E.g.: if the function is activated while the top
has two areas switched on the programme remains
blocked even if you try to switch another area on. The
same thing happens if the appliance is switched off and
the function is activated; the top doesn't switch on.
To activate or deactivate it hold a finger on the
B
sensor
for about two seconds. The function is active when
warning light
E
is switched on.
Timer (Fig.5).
- Select the plate with the relative power.
- Press the selection key again of the already-activated
plate.
- Using the
"+"
and
"-"
keys set the desired time.
- The decimal point at the side of the power level will
indicate that the plate has the
TIMER
function activated.
- An acoustic signal will indicate switching off of the
cooking area.
THE MANUFACTURER DECLINES ALL RESPONSI-
BILITY FOR EVENTUAL DAMAGES CAUSED BY
BREACHING THE ABOVE WARNINGS.