manualshive.com logo in svg

Caple C808C, Instruction Manual, Page: 19 / 24

Share
Download
Caple C808C Instruction Manual Download Page 19

Instruction manual C808C

Please keep this instruction manual for future reference

19

Connecting the hob to the mains power supply
WARNING:

The power supply should be connected in compliance with the relevant standard,or 
a single-pole circuit breaker. The method of connection is shown below.

If the total number of heating units of the appliance you choose is not less than 
4, the appliance can be connected directly to the mains by single-phase electrical 
connection, as shown below.

 

- If the cable is damaged or needs replacing, this should be done by an after-sales 

technician using the correct tools.

 

- If the appliance is being connected directly to the mains supply, an omnipolar 

circuit breaker must be installed with a minimum gap of 3mm between the 
contacts.

 

- The installer must ensure that the correct electrical connection has been made and 

that it complies with safety regulations.

 

- The cable must not be bent or compressed.

 

- The cable must be checked regularly and only replaced by a qualified person.

Summary of Contents for C808C

























Reviews:

No comments