Instruction manual C4246
24
25
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual C4246
R E P L AC I N G T H E OV E N L I G H T
› Switch off your oven at the mains.
› Remove the glass cover, by unscrewing this from the light socket.
› Remove the light bulb by pulling it from the light socket and replace it with a similar bulb.
Halogen light characteristics:
Voltage: AC220V-240V
Wattage: 25W
Cap: G9
› Remount the glass cover and reconnect the appliance to the power supply.
D O N OT TO U C H :
The light bulb directly with your hands.
WA R N I N G :
Ensure that the appliance is disconnected from the mains before replacing the light
to avoid the possibility of electric shock.
D I S S E M B L I N G T H E OV E N D O O R
To make it easier to clean the inside of your oven, the oven door can be removed, by proceeding
as follows:
› Open the door completely and lift the 2 levers ‘B’;
› Now, shut the door slightly, you can lift it out by pulling out the hooks ‘A’ as shown below.
A S S E M B L I N G T H E OV E N D O O R
› With the door in a vertical position, insert the two hooks ‘A’ into the slots.
› Ensure that ‘D’ is hooked perfectly onto the edge of the slot (move the oven door backwards
and forward slightly)
› Keep the oven door open fully, unhook the 2 levers ‘B’ downwards and then shut the
door again.
REPLACING THE OVEN LIGHT
- Switch off your oven at the mains.
- Remove the glass cover, by unscrewing this from the light socket.
- Remove the light bulb
by pulling it from the light socket
and replace it with a similar
bulb
.
- Remount the glass cover and reconnect the appliance to the power supply.
DO NOT TOUCH
the light bulb directly with your hands.
WARNING:
Ensure that the appliance is disconnected from the mains before replacing the
lamp to avoid the possibility of electric shock.
Instruction manual
Please keep this instruction manual for future reference
21
REPLACING THE OVEN LAMPS
- Switch off your oven at the mains.
-
Unscrew the glass cover attached to the lamp-holder
- Remove the light bulb and replace it with a similar one
- Remount the glass cover and reconnect the appliance to the power supply.
DO NOT TOUCH
the light bulb directly with your hands.
WARNING:
Ensure that the appliance is disconnected from the mains before replacing the
lamp to avoid the possibility of electric shock.
Halogen lamp characteristics
- Voltage: AC220V-240V
- Wattage: 25W
- Cap: G9
H
Haallooggeenn llaam
mpp cchhaarraacctteerriissttiiccss
- Voltage: AC220V-240V
- Wattage: 25W
- Cap: G9
Telescopic runners
To assemble the telescopic runners:
- Remove the side racks
- Choose which shelf to use with the telescopic runner. Pay attention to the
direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’
on the frame (see Fig.
1
).
- Secure the two side racks with the guide rails using the holes provided on the
oven walls (see Fig. 3).The holes for the left rack are situated at hole F1, F2 and
the right rack at hole D1, D2.
- Finally, re-fit the side rack
Fig.
Side racks and Catalytic liners
To install, align the 2 holes in the catalytic liners with the 2 steel clips in the side of
the oven cavity. Once aligned, attach side racks by pushing these onto the furthest
steel clip and then clicking the other end onto the closest steel clip.
This will secure the catalytic liners to the sides of the oven. To remove, unclip the side
racks from the side of the oven, and remove the catalytic liners.
Visit our Caple website to view a 'How to video' on this. www.caple.co.uk
Light
CAVITY
