Instruction manual C3245
Please keep this instruction manual for future reference
14
IMPORTANT:
- Position the mains supply cable so that it is never subjected to a temperature
which is more than 50˚C above ambient temperature.
- The electrical safety of the appliance can only be guaranteed when it has been
correctly connected to an efficient earthed power supply, as instructed in the
regulations for electrical safety.
- Caple cannot be held responsible for any damage to persons or objects due to
lack of an earth connection.
Electrical connection
Fitting the power supply cable
- Open the terminal box by inserting a screwdriver into the side tabs of the cover.
Use the screwdriver as a lever by pushing it down to open the cover
- Install the power supply cable by loosening the cable clamp screw and the three
wire contact screws. Connect the wires to the corresponding terminals:
the Blue wire to the terminal marked ‘N’,the Brown wire to the terminal marked
‘L’ and the yellow/green wire to the terminal marked .
- Secure the cable by fastening the clamp screw.
- Close the cover of the terminal box.
- When wiring the terminal box care must be taken to fit and tighten the links on
the live (L) and neutral (N) terminals
L
N
C3245 - Instruction Manual.indd 14
20/02/2017 12:13
