background image

28

29

GB

          

5 sec.!!

The cleaning process takes place at a temperature 
of  250°C  and  lasts  one  hour.  Do  not  use  it  for 
cooking food!!

The  oven  light  is  activated  and  can  be  switched  off  and  on 
again at any time.
All  the  self-cleaning  panels  will  perform  effectively  for  thirty 
cleaning processes, after this limit the panels must be replaced. 
The panels should be cleaned exclusively with tap water and 
replacements can be ordered from your specialised dealer.

Oven light control

The light control is active on all the cooking functions and is 
independent, meaning that it can be switched on or off to suit 
your requirements, when you want! 
The oven light is usually kept on throughout the heating time 
and then for three minutes after reaching the temperature set. 
From then on, the oven light switches off to save power.
To check the cooking, it may be necessary to switch on the 
internal  light.  All  you  have  to  do  is  touch  the  light  symbol: 
the  light  will  stay  on  for  three  minutes  and  then  switch  off 
automatically.  Naturally  you  can  switch  it  off  immediately  by 
touching the light symbol again. 
Some models are equipped with a door control. This feature 
uses sensor technology to detect the position of the door to 
control the oven light: the opening of the door is indicated by 
a beep and the light comes on. It switches off when the door 
is closed again.

Programming the oven

The programming of the oven offers three modes for controlling 
the cooking time. They are available with the standard cooking 
functions. When the food probe is used, they are deactivated 
(see specific chapter).

The functions can be selected in sequence, from left to right, 
by  touching  the  clock  symbol:  every  time  it  is  touched,  a 
symbol lights up in sequence.

Programming the timer: cooking time

Touch the timer symbol once. The relative symbol lights up. 
The clock display will replace the indication of the current time:
The  dividing  dots  flash  to  indicate  that  it  is  possible  to 
programme the cooking time.

Once the cooking time has been set, the 
display  will  show  the  current  time  again 
and the cooking time symbol will be lit.

Summary of Contents for C2282

















Reviews: