Instruction manual C2231
16
17
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual C2231
Telescopic runners
To assemble the telescopic runners:
- Remove the side racks
- Choose which shelf to use with the telescopic runner. Pay attention to the
direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’
on the frame (see Fig.
1
).
- Secure the two side racks with the guide rails using the holes provided on the
oven walls (see Fig. 3).The holes for the left rack are situated at hole F1, F2 and
the right rack at hole D1, D2.
- Finally, re-fit the side rack
Fig.
1
SSiiddee rraacckkss aanndd C
Caattaallyyttiicc lliinneerrss
To install, align the 2 holes in the catalytic liners with the 2 steel clips in the side of
the oven cavity. Once aligned, attach side racks by pushing these onto the furthest
steel clip and then clicking the other end onto the closest steel clip.
This will secure the catalytic liners to the sides of the oven. To remove, unclip the side
racks from the side of the oven, and remove the catalytic liners.
Visit our Caple website to view a 'How to video' on this. w
ww
ww
w..ccaappllee..ccoo..uukk
Figure 1.
N OT E :
Telescopic runners are optional accessories and are not included.
S I D E R AC K S
Attach the side racks by pushing these onto the furthest steel clip and then clicking the other end
onto the closest steel clip.
Visit our Caple website to view a ‘How to video’ on this. www.caple.co.uk
Telescopic runners
To assemble the telescopic runners:
- Remove the side racks
- Choose which shelf to use with the telescopic runner. Pay attention to the
direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C’
on the frame (see Fig.
1)
.
-
Finally, re-fit the side racks as per below instructions.
Fig.
1
SSiiddee rraacckkss
Attach the side racks by pushing these onto the furthest steel clip and then clicking
the other end onto the closest steel clip.
Visit our Caple website to view a 'How to video' on this. w
ww
ww
w..ccaappllee..ccoo..uukk
Figure 2.
T E L E S C O P I C R U N N E R S ( O P T I O N A L A C C E S S O RY )
To assemble the telescopic runners:
»
Remove the side racks (see section below and Fig.2)
»
Choose which shelf to use with the telescopic runner.
Paying attention to the direction in which the runner is
to be extracted, position joint ‘B’ and joint ‘C’ on the
frame (see Fig.1).
»
Squeeze the bars together slightly and clip either
end of the telescopic runners on to the side racks.
»
Finally, refit the side racks (See below and Fig.2)
C A R E A N D M A I N T E N A N C E
I M P O RTA N T:
Unplug your oven before cleaning, or performing maintenance!
To extend the life of your oven, it must be cleaned frequently, keeping in mind the following:
D O N OT U S E S T E A M E Q U I P M E N T TO C L E A N T H E A P P L I A N C E
»
o protect against the risk of electrical shock, do not immerse the unit, cord or plug in water
or other liquid, or sprinkle water to clean the appliance!
»
Don’t clean the appliance when it is still hot! The inside and external surfaces of the oven
should preferably be cleaned with a damp cloth when it has cooled down.
»
Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper towel or
cloth.
»
If you use your oven for an extended period of time, condensation may form.
»
Dry it using a soft cloth.
»
There is a rubber seal surrounding the oven opening which guarantees its perfect
functioning. Check the condition of this seal on a regular basis. If necessary, clean it and
avoid using abrasive products or objects to do so. Should it become damaged, please
contact Caple service. We recommend you avoid using the oven until it has been repaired.
»
Never line the oven bottom with aluminium foil, as the consequent accumulation of heat
could compromise the cooking and even damage the enamel.
»
Clean the glass door using a damp cloth and dry it with a soft cloth.
»
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may result in shattering of the glass.
