27
EN
FUNCTIONS OF THE TRAINING COMPUTER
• Use the MODE button to select between the functions.
• Press and hold the RESET button for 2 seconds to clear the time, distance
and calories.
SCAN
Press MODE to access the SCAN function. The display
automatically changes every 6 seconds between all
available function displays.
SPEED
Display of the current speed.
DIST
Display of the training distance. Press MODE to access
the DIST function. Then press SET to set the distance.
When the distance is counted down, an alarm sounds
for 10 seconds.
TIME
Display the training duration. Press MODE to access the
TIME function. Then press SET to set the time. When
the time counts down, an alarm sounds for 10 seconds.
ODO
Displays the total distance travelled (since startup.
Cleared when the battery is changed).
CAL
Display of calories burned so far. Press MODE to access
the CAL function. Then press SET to set the calories.
When the calories are counted down, an alarm sounds
for 10 seconds.
AUTO ON/OFF
The training computer will automatically turn on at the
beginning of the workout and will automatically turn off
after the unit has not been used for 4 minutes.
Note
: Replace the batteries with new 2 batteries type AA when the display
decreases.
Summary of Contents for 10035533
