4
STEP 1: ASSEMBLING THE FRAME
Lay out the frame in accordance with below with the spring holes facing upwards.
Push all sections together ensuring all sections are fully mated together.
Note:
on the long sides,
the frame will appear to bow outwards
– this is by design. When the springs are attached the frame
will get pulled inwards, but will always have a slight outwards bow.
Next, go to one corner and take 1 x W-Shaped Leg (Part G), two Leg Extensions (Part H) and two
Enclosure Socket Extensions (Part I)
Insert the leg extensions into the w-shaped leg, then insert the enclosure socket extensions on top
of the leg extensions
Finally, the assembled legs fix into the two T
connector pieces on the frame across the corners
as indicated in this diagram.
