U
SB
D
river
1.
Connect to PC using USB cable.
2.
Access to Control Panel Device
Manager and click on MWDG-MB
device.
3.
Install USB driver manually
located on CD. File
“MWDG_CDC.inf”
4.
Click on “continue” when requested
5.
Note for WIN8.1: in case of
malfunctions look at the manual
“Win8.x Installare Drivers USB
R01.pdf” located on CD.
6.
At the end of the installation
process, a new COM por twill be
installed: “WineCap MWDG (CDC)”
S
tart
S
ensors
1.
Connect the MWDG-MB as shown
2.
Power on the MWDG-MB and verify
the “System”Led: green flashing
3.
Activate the probe
a.
Approach the
W
ineCap
K
ey
b.
Wait for 2 flashes (test)
4.
Remove the Key
5.
Verify the LED:
LED FLASHES
RADIO SIGNAL
QUALITY
5 green
flashes
Excellent
4 green
flashes
Good
3 green
flashes
Fair
2 amber
flashes
Sufficient
1 red flash
Insufficient
1 red flash, 2
seconds long
Out of range –
network search
8
5
Temperature
Probe
WSD00T
W
in
eC
ap
Ke
y
