The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
This symbol indicates that this product incorporates double insulation between hazardous
mains voltage and user accessible parts.
•
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•
WARNING:
To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture.
•
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified, may result in
hazardous radiation exposure.
•
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
•
WARNING:
Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface.
Use a protective barrier between the unit and surface to protect the surface.
•
WARNING:
Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit
is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
•
CAUTION:
Batteries should be replaced only with the same or equivalent type
•
WARNING:
Shock hazard - Do Not Open.
The AC plug may be used as a disconnect device and should remain accessible during use. To disconnect the unit
from the power source completely, remove the AC plug from the wall receptacle.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
DVD and CD
loading a disc
Press the
OPEN/CLOSE
button to open the
disc drawer.
Load a disc into the DVD player, label side facing up.
Press the
OPEN/CLOSE
button to close the
disc drawer.
After a disc is loaded, it will begin playing automatically.
playing a loaded disc
Follow the instructions for loading a disc.
If the disc does not begin playing automatically,
play the
PLAY/PAUSE
button.
programming a loaded disc
Follow the instructions for loading a disc and playing
a loaded disc.
While the loaded disc is playing, press the
PROG
button on the remote.
Use the
ARROWS/ENTER/NUMBER Keypad
buttons to
highlight and select a DVD title and chapter, or CD track.
Highlight the
PLAY
button to play.
DVD titles and chapters or CD tracks will play
in the order they are programmed.
Repeat step 3 until the desired DVD titles and
chapters or CD tracks are programmed.
playing a JPEG CD
Load a JPEG photo disc into the player by following the
instructions for loading a disc.
A slide show of JPEG photos from the CD will begin
playing automatically.
Press the
STOP
button to access a file view of the
loaded JPEG disc.
Use the
ARROWS/ENTER
buttons on the remote to
select and view photos.
access the DVD setup menu
Press the
STOP
button on the remote twice.
In order to access all of the features of the
DVD setup
menu
, the DVD player needs to be fully stopped.
Press the
SETUP
button the remote.
