setting the clock
u
Plug in the unit.
v
Press and hold the TIME SET button until the clock flashes in the display.
w
Press the TUNE DOWN / HOUR button repeatedly to set the hour and press the
TUNE UP / MIN button repeatedly to set the minute.
x
Press the TIME SET button again to store the new clock setting.
note:
If you do not press any button for about 10 seconds while setting the clock,
the clock setting will be canceled.
playing the radio
u
With the CR15 plugged in and powered ‘ON’, press TIME SET / BAND button to
select FM or AM band.
v
Repeatedly press the TUNE UP / MIN or TUNE DOWN / HOUR button to manually
adjust the tuning on the display until the desired station appears.
w
For auto tuning
, press and hold the TUNE UP / MIN or TUNE DOWN / HOUR
button until the display starts to scan then release the button and the tuner will
search and stop on the next strongest station it finds. Repeat this process until
the desired station appears on the display.
notes:
Fully extend the FM wire antenna to increase reception sensitivity.
Keep digital music players or mobile phones away from the FM antenna as this
may cause interference. Do not place the FM antenna near the AC power adaptor
as this may lead to reception interference.
setting radio presets
u
To preset a radio station to memory, first follow the steps above to tune in the
desired station.
v
Press and hold the ALARM SET / PRESET button to create a preset for the current
station. “P” will appear and “##” (the preset number) will blink on the display.
w
Press the TUNE UP / MIN or TUNE DOWN / HOUR button to select a preset
number (01- 10). Press the ALARM SET / PRESET button again to confirm the
setting and the station will be saved into memory.
x
Repeat these steps for up to 10 presets, as desired.
note:
Saving a new station preset in the same position as a previously saved
station will replace the previously stored station for that preset number.
recalling radio presets
To recall saved presets, repeatedly press the ALARM SET / PRESET button until the
desired preset number appears in the display and the unit tunes to the station.
setting the alarm
u
In STANDBY mode, press and hold the ALARM SET / PRESET button, the alarm
time will flash.
v
Press the TUNE DOWN / HOUR or TUNE UP / MIN button to set the alarm time.
w
Press ALARM SET / PRESET button to confirm the alarm time set.
x
Alarm source indicator (default as alarm radio) will blink on the display. Press TUNE
DOWN / HOUR or TUNE UP / MIN button to set the desired alarm source (Chime or
Radio). The indicator of the selected alarm source will blink on the display.
y
Press ALARM SET / PRESET button to confirm the alarm source set, the volume level
will blink on the display (there is no volume setting if alarm source is set to Chime).
U
Press TUNE DOWN / HOUR or TUNE UP / MIN button to set maximum alarm volume.
V
Press ALARM SET / PRESET button to confirm the alarm set and the alarm
indicator will appear on the display.
notes:
To deactivate the alarm, press ALARM SET / PRESET button, the alarm
indicator will turn off.
Before setting the alarm, make sure that the clock is set correctly
(see “Setting the clock”).
silencing the alarm
When the alarm sounds, press ALARM SET / PRESET button to silence the alarm.
snooze
u
When alarm sounds, pressing the SNOOZE / SLEEP button will temporarily
silence the alarm. The alarm will sound again after approximately 10 minutes.
v
To extend the snooze duration, repeatedly press the SNOOZE / SLEEP button to
cycle through and select one of the snooze presets:
10
20
30
40
50
60
notes:
Once the snooze function has been activated, press the SNOOZE / SLEEP
button anytime and the display will show the remaining time.
Repeatedly press the SNOOZE / SLEEP button to adjust or modify the current
snooze time setting.
setting the sleep timer
The CR15 features a sleep timer to allow you to fall asleep to the radio using the
built-in sleep timer to automatically turn off the radio.
u
When the unit powered ‘ON’, press the SNOOZE / SLEEP button. The SLEEP
icon and “15” will appear on the display briefly indicating the unit will turn off
after 15 minutes.
v
To increase the sleep time duration, up to a maximum of 90 minutes,
repeatedly press the SNOOZE / SLEEP button to select one of the following
sleep time presets:
15 30 60 90 OFF
w
With the sleep timer active, press SNOOZE / SLEEP button once to view the
remaining sleep time.
x
To cancel the sleep timer function, repeatedly press the SNOOZE / SLEEP
button until “OFF” appears in the display.
location of controls
u
Speaker
v
FM Antenna Wire
w
ALARM SET / PRESET
x
Power ON / OFF
y
TUNE UP / MINUTE
U
TUNE DOWN / HOUR
V
SNOOZE / SLEEP
W
LED Display
X
Battery Compartment (bottom)
at
ak
VOLUME –
al
TIME SET / BAND (AM/FM)
am
AC Power Adaptor
an
ALARM ‘Radio’ Indicator
ao
ALARM ‘Chime’ Indicator
ap
Low Battery Indicator
aq
PM Time Indicator
ar
LED Display
as
SLEEP Indicator
1
For further assistance, please visit our website at hellocapello.com
or contact customer service at [email protected] or 1-855-896-1795
Life Lab International Ltd.
specifications
GENERAL:
Power Source ...................................................................... AC 7.5V 100mA AC/AC Adapter
AC Power Supply ............................................................................................120V ~ 60Hz
Battery Backup ........................................................................ 2 x 1.5V “AAA” size batteries
RADIO SECTION:
Frequency Range (FM) ................................................................................87.5 – 108 MHz
Frequency Range (AM) .............................................................................. 530 – 1710 KHz
Specifications are subject to change without notice.
3
2
13
14
16
15
7
17
4
5
6
12
11
10
9
8
19
18
