Edit: 30/07/19 | Rev A | Page:
14
II. Positioning the CAP2600 Workshop™
2.1 Vehicle preparation
The following information is provided as a recommendation. Please refer to applicable regulations.
For light vehicles:
Preparation:
-
Check the tyre pressure
-
When the vehicle is fitted with a manual beam adjustment system (in the passenger compartment
or on the headlight inserts), select the position intended by the manufacturer depending on the
load
-
When the vehicle is fitted with an adaptive lighting system (AFS), deactivate it by selecting "dipped
beams"
-
When the vehicle is fitted with a headlamp cleaning system, check its operation and clean the
insert if necessary.
For heavy goods vehicles:
Vehicle preparation:
Before the inspection,
-
Set the load compensation system to the appropriate position
-
Disable the AFS
-
Clean the headlamp inserts
Vehicle and headlamp beam tester position:
-
Position the vehicle with the wheels straight without using the parking brake (a wheel chock can
be used).
-
The engine will be left running if necessary to maintain the air suspension
