www.cap-homey.com
User Manual
CAP-TECH INTERNATIONAL CO.,LTD.
Including of WiFi Network
1)
Ensure the WiFi SoundBox with adequate power, and in the power-on state.
2)
Press and hold the WiFi button for 5 seconds, the button will flash quickly with a white light
about 5-6 times / seconds (a voice would be prompt at this time: please use APP to configure
the network) confirming the device has been in network inclusion mode.
3)
Choose " Broadlink " to enter the Network Inclusion mode on the APP, then click "Save".
4)
Check the status of the WiFi Indicator LED, if the white light flashes slowly confirming the
device is connecting to the wireless network (a voice would be prompt at this time: connect-
ing to the network, please wait patiently), if the white light stop flashing confirming the de-
vice has been included into the network.
5)
Please go to the device list interface, and refresh the device list, the device will be displayed.
Installation Instructions
INSTALLATION PLACE
This device is small in size, can be arbitrarily placed. In addition, when you install the WiFi
SoundBox, it is not need wiring require and only need to insert the adapter into proper place,
which can make the installation completed.
INSTALLATION TIPS
a)
The adapter specification: Input: 100V-220V AC
Output: 5.0V==1.5A
b)
Because this device is a WiFi device, please place it in the WiFi range, in order to ensure the
remote control effect when installing.
