www.cap-homey.com
User Manual
CAP-TECH INTERNATIONAL CO.,LTD.
1)
Ensure the device with adequate power, and in the power-on state.
2)
Press and hold the Reset button for 5 seconds and then release the button, until the device
flash quickly with a blue light.
Fig.2
3)
Choose " Broadlink " to enter the Network Inclusion mode on the APP, then click "Save".
4)
Check the status of the WiFi Indicator LED, if the blue light flashes slowly confirming the
device is connecting to the wireless network, if the blue light stop flashing confirming the
device has been included into the network.
5)
Please go to the device list interface, and refresh the device list, the device will be displayed.
6)
We can study same keys of the infrared intelligent remote controller, the specific steps are as
follows:
I.
Enter the “Study” mode on the APP.
II.
Click the keys which need to study, and we can see the device lights orange light.
III.
Press the corresponding button of the household appliance.
IV.
Check the status of the orange light, if the orange light shows off, and APP popups a
message "operation success ", confirming the device has completed the study.
V.
Click the "Save" on the APP, then click on the button which has ever studied suc-
cessfully, if the orange light flashes once, confirming the instructions have been
launched.
WiFi indicator LED
