Canyon SPeedMax CF, Instructions Manual

Page: 5 / 31

6 7
EN
ASSEMBLY FROM ThE
BIKEGUARd
Assembling the bike from the BikeGuard is no
witchcraft, but you should proceed with care
and deliberation. Unprofessional assembly
can render the bike unsafe.
We would first like to make you familiar with
the components of your Canyon Speedmax CF.
Unfold the front cover of this manual. here
you will find the illustration of a Canyon
Speedmax CF showing all the essential com-
ponents. Keep this page folded out while you
are reading. This means that you can quickly
find in the text the component that is being
referred to.
CHECK THE CONTENTS OF THE BIKEGUARD
ASSEMBLY FROM ThE BIKEGUARd
Remove the padding (cardboard boxes), if
there is any, and take out of the BikeGuard
the wheels that are sometimes packed in
wheel bags. Carefully lift the frame together with the rear
cardboard support out of the BikeGuard.
i
You will not find the wheels packed
in wheel bags for every Speedmax.
hold the handlebars tightly while
lifting the frame out so that they
cannot drop and get damaged.
i
Keep the entire packaging material
as well as the BikeGuard in a dry
place. If you intend to ship your Canyon or
to take it with you on a trip, you will have
everything at hand.
UNPACKING
ASSEMBLY FROM ThE BIKEGUARd
When using a box cutter make sure
you do not damage the component
or injure yourself. Make it a rule to cut
away from yourself and the component!
i
Share the pleasure that your new
Speedmax brings and ask a helper
to assist you in unpacking it from the
BikeGuard and in assembling it.
i
The easiest and safest way to as-
semble the bike is when you use a
workstand or ask someone to help you.
First, open the BikeGuard.
To do this, only use a box cutter or a similar
knife with a very short blade. Never use any
kind of knife on the bicycle itself.
The BikeGuard contains the assembled frame
with all add-on parts as well as the wheels
that are sometimes packed in wheel bags, the
saddle and a box with small parts, e.g. quick-
releases, reflectors and pedals, as the case
may be.
Pull the saddle with the di2 rechargeable bat-
tery, which is mounted on the lower end of the
seat post, out of the BikeGuard. If necessary,
first remove the protective film from the seat
post. Carefully place the frame on the cardboard
support. Take the box with small parts that is
at the bottom or to one side out of the Bike-
Guard.