EN
parameters, select apps that you want to receive
notifications from, etc.
Unbind the smartwatch with your mobile phone
1.
Open “Canyon Life” app on your smartphone.
2.
Tap “Unpair device” in the “Setup” menu and
confirm “OK”.
3.
To disconnect your smartwatch with an iPhone,
click “Unpair device” in the “Setup” menu of “Canyon
Life” app, and go to the Bluetooth settings on your
iPhone, tap icon near your device and select “Forget
This Device”.
Operation Introduction
• To switch on the watch, press and hold the center of
the touch screen until the display is on.
• To switch off the watch, slide the screen from up to
down on the main interface to enter the sub-menu,
click the power off icon there.
• You can turn on the screen by either pressing the
touch screen or by raising your hand if the gesture
control function is switched on in the «Setup» menu
of the Canyon Life app.
2. HOW TO USE
• Turn on:
Press and hold the center of the touch
screen for 3 seconds.
