Canyon CNS-TWS8B, Quick Start Manual, Page: 15 / 120

15
from the charging case. The connection between the earphones will be
established automatically, and a short tone will sound. Flashing red and blue
lights
(7) indicate that the headphones are ready for pairing with the device.
Turn on the BT unit, go to the BT settings and select the "Canyon TWS8"
earphones. If the pairing is successful, you will hear a tone.
Control when listening to audio recordings (fig. I, J) . Select a track on your
device. Play/pause: press the touch button (8) of either earphone twice. Skip:
press the touch button (8) on the right (skip to the next track) or left (skip to
the previous track) earphone three times.
Control with an incoming call (fig. I, J) . When there is an incoming call, to
answer or end the call, press the touch button (8) on either earphone twice.
To reject an incoming call: press and hold the button (8) of either earphone for
2 seconds.
Call the voice assistant (fig. I) . Press and hold the touch button (8) of the
left earphone for 2 s.
Switching on the game mode (fig. J) . Press and hold the touch button (8) of
the right earphone for 2 s.
Reset the pairing of the earphones to the device . Take the earphones out
of the case. Press and hold the touch buttons (8) of both earphones