FIGURE 2.
The navigation between functions (or menu
items) is performed by pressing the B
button.
1. Main screen
2. Date in the mm.dd format
3. Pedometer.
This screen displays the
number of steps made during the day. The
steps are counted by means of a special
integrated sensor, which is sensitive to arm
movements.
4. Calories.
This screen displays burned
calories. Measurements are calculated by a
predefined mathematical model using the
pedometer data.
5. Distance.
This screen displays the
distance travelled. Values are calculated
based on the pedometer readings using a
pre-set mathematical model.
6. Alarm clock.
This screen displays the
current alarm clock time
To set the alarm clock, see the Alarm Clock
Setting Section
7. Temperature*.
This screen displays the air
temperature.
8. Barometer/altimeter*.
By default, this
screen displays the atmospheric pressure
(Pa); to switch to the altimeter, briefly press
button C
9. UV radiation level *.
This screen displays
the current UV radiation level
*Caution!
Weather, barometer and UV radiation data
are transferred to your watch from the
phone, if the watch is connected to Canyon
Fit. Make sure that the data transfer and
GPS functions of your phone are active,
since all above parameters are dependent
on data from the Internet and GPS satellites.
The presence of various sensors in the
watch does not guarantee the accuracy of
the physical measurements and can only
serve as an approximate measure of the
stated physical variables.
These devices are not designed to give
absolute physical measurements.
DISPLAY MODES FUNCTIONS ON THE SCREEN:
1
2
3
4
5
6
7
8
9
5
