6
Calories/ODO Mode
Press
MODE
to cycle through modes until
KCAL
/
ODO
is
displayed as shown.
Accumulated Calories Burned
(unit: KCAL) is
displayed at the top portion of the screen while
Accumulated Distance Traveled
is displayed at the
bottom.
Set Calories/Day Calories Mode
Press
MODE
to cycle through modes until
SETCAL
/
DAYCAL
is displayed as shown.
Target Calories
is displayed at the top portion of the
screen while
Actual Daily Calories Burned
is displayed
at the bottom.
z
Press
SET
to adjust
Target Calories
. Press
SET
to
switch between digits and press
UP
/
CLR
to adjust
values.
z
A bar scale located at the top edge of screen displays
the
Percentage of Target Calories
. Both
Actual
Daily Calories Burned
and
Percentage of Target
Calories
will be reset daily.
Pulse Rate Monitor Function
z
Press
Pulse
to activate pulse reading mode.
z
Place a finger (preferably the index finger) on the
pulse rate sensor located at the edge of
CANYON
CNS-DPM2
. The device automatically begins the
pulse examination once the finger is detected.
NOTE
:
z
Please avoid placing excessive pressure on the pulse rate sensor. The results
might not be accurate.
z
The device may take more than 10 seconds to correctly display the current
pulse rate. The pulse rate is measured with BPM (Beat per minute) unit.
