ENG - 2
5.
Connect PC(s) with LAN ports (PC1/PC2/PC3/PC4) of the device by
CAT 5 Ethernet cables. 1 PC connects to 1 port using 1 cable only.
6.
Power on the cable or DSL modem.
7.
Plug in power adapter. The Power status indicator at front panel of
device will light up as soon as power adapter is connected properly.
8.
Power on PC(s).
Internet Configuration Wizard
The default network address of the device is set as 192.168.1.1. Please
configure IP address of host PC at 192.168.1.XXX where XXX is a number
between 002 and 254. The subnet mask should be 255.255.255.0. Please
follow below steps to enter web browser management mode.
1.
Open a browser (Internet Explorer browser only) and type in
“192.168.1.1” at the address bar and press Enter.
2.
Type in “guest” at the user name text box and “guest” again at the
password text box.
3.
The web browser management home page will be displayed.
4.
Click on 8 different functions on the main router menu on the left.
The corresponding information will be displayed at right.
5.
Click on Help at any time to bring up help menu.
1.
Start Wireless AP Configuration Wizard
z
Internet Configuration Wizard
will pop up upon successful
login.
NOTE:
Temporarily disable popup
window blocking option if
necessary or click on Wizard to
start.
z
Select pop up to enable
automatic Internet
Configuration Wizard prompt
window. Click on Save to save
this setting.
z
Click on Start to continue.
z
Click on Exit to exit.
