CANYON FURNITURE COMPANY
A.- (1) TOP BUNK BED
B.- (2) 4"METAL DOWEL PINS
C.- (1) LOFT DRESSER
M.- (1) CASTER BED HEADBOARD
D.- (1) LOFT DESK
E.- (1) LOFT HUTCH
J.- (6) 1 1/4" SCREW
B.- (2) 4"METAL DOWEL PINS
F.- (4) SIDE RAILS
G.- (2) GUARD RAILS
H.- (24) 80MM FLAT HEAD BOLTS
I.- (24) 5/16"-18 X 5/8" CROSS DOWEL NUTS BLACK
J.- (1) 5MM ALLEN WRENCH
K.- (1) HEADBOARD
L.- (1) FOOTBOARD
M.- (4) CASTER SOCKETS
N.- (1) LADDER
Q.- (4) 39'' SLATS
O.- (2) METAL HOOK BRACKETS
P.- (6) 1" SCREWS
R.- (8) 1 1/4" SCREWS
1.- ASSEMBLE TOP BUNK BED, USING TWO TOP BUNK BEDS (A),ONE LOFT DRESSER (C),ONE LOFT DESK (D),TWO LOFT HUTCH (E) TWO SIDE RAILS (F),&TWO GUARDRAILS (G)
2.- TAKE LOFT DRESSER (C) AND LOFT DESK (D), THEN PLACED THEM IN DESIRED POSITION IN THE ROOM, (PLACE FRONT FACE OF DESK OUTWARDS).
3.- INSERT TWO METAL DOWEL PINS (B) ON TOP IN EACH OUTSIDE CORNER OF LOFT DRESSER&LOFT DESK, TAKE THE LOFT HUTCH (E),&PLACE IT ON TOP OF LOFT DRESSER
& LOFT DESK ALIGNING THE METAL DOWEL PIN WITH EACH PRE - DRILLED HOLE IN EVERY END OF THE LOFT HUTCH UNTIL THE METAL DOWEL PIN ARE ALL THE WAY IN THE
HOLE OF THE LOFT HUTCH, REPEAT THE SAME PROCESS WITH TOP BUNK BED (A),
SEE FIG.9
4.-INSERT 2 CROSS DOWEL NUTS (I) IN ACCESS HOLE INSIDE THE SIDE RAIL&GUARDRAIL,ALIGN THE CROSS DOWEL NUT,MAKE SURE THE GROOVE IS HORIZONTAL,
SEE FIG.10
5.- ATTACH TWO SIDE RAILS & TWO GUARD RAILS TO LOFT DRESSER/HUTCH/TOP BUNK BED ASSEMBLY&LOFT DESK/HUTCH/TOP BUNK BED ASSEMBLY, INSERTING TWO FLAT
HEAD BOLST (H) INTO TOP BUNK BED HOLES, USE THE 5MM ALLEN WRENCH (J) TO TIGHTEN BOTH BOLTS,
(DO NO TIGHTEN COMPLETELY UNTIL ALL PIECES
ARE CONNECTED TOGETHER)
SEE FIG.11,
REPEAT THE SAME PROCESS ON ALL FOUR CORNERS.
6.- PLACE FOUR SLATS (Q) ON TOP SIDE RAIL CLEATS,ONE SLAT IN BOTH ENDS,PUSH THE SLAT AGAINST THE BED END POST
(FIG.A)
&TWO SLATS IN THE MIDDLE AT EQUAL
DISTANCE FROM THE END SLATS, THEN EACH SLAT MUST BE FASTEN WITH TWO 1 1/4" SCREWS (R),
SEE FIG.12
N.- (1) CASTER BED FOOTBOARD
LOFT HUTCH BOX (28-766) FIG.4 (2PCS)
HARDWARE PACK
(HPK00012-0)
6 PIECE RAILS BOX (28-730) FIG.5
LOFT DESK BOX (28-603) FIG.3
TOP BUNK BED BOX (28-705) FIG.1 (2PCS)
COTTAGE COLORS COLLECTION
LIST OF CONTENTS
TOP BUNK BED ASSEMBLY INSTRUCTIONS CONFIGURATION TYPE # 1
K.- (1) 3 DRAWER NIGHT STAND
3 DRAWER NIGHT STAND BOX ( 90-503 )
6 DRAWER LOFT DRESSER BOX (28-207) FIG.2
L.- (1) DESK TOP
CASTER TWIN BED BOX ( 90-707,90-709 )
O.- (4) METAL CASTER SOCKET
TWIN SLATS BOX (100-645) FIG.8 (2 BOXES)
DESK TOP BOX ( 90-602 )
HARDWARE PACK
(HPK00123-0)
HARDWARE PACK
(HPK00016-0)
TWIN BOTTOM HDBD&FTBD BOX (28-707) FIG.6
HARDWARE PACK
(HPK00008-0)
HARDWARE PACK
(HPK00104-0)
HARDWARE PACK
(HPK00127-0)
LADDER BOX (28-720) FIG.7
A
FIG.1
B
FIG.5
C
FIG.2
F
G
I
J
FIG.3
M
L
K
FIG.6
FIG.10
YES,
HORIZONTAL GROOVE
FIG.9
FIG.11
FIG.12
NO
D
E
B
FIG.4
H
HARDWARE PACK
HPK00123-0
HARDWARE PACK
HPK00012-0
HARDWARE PACK
HPK00104-0
HARDWARE PACK
HPK00127-0
N
O
P
HARDWARE PACK
HPK00008-0
FIG.7
Q
R
HARDWARE PACK
HPK00016-0
FIG.8
FIG.A
REV 02 04/02/2019
PAGE 2 OF 5
KIS01179-0
