Maintenance
– 21 –
Check for damaged or deteriorated
fuel hoses.
Check for dirty or clogged fuel
filter cartridge.
Cleaning: See page 30
There must be no dirt or
clogging.
There must be no wear or
carbon accumulation.
There must be no
damage
Fuel system
Drive clutch
V-belt
Transmission
En
gi
ne
Po
we
r t
ra
in
Item
Content of inspection
Remarks
Check for oil leakage from head
cover, oil pan, pipes, etc.
Check for loose or missing
mounting bolts or nuts.
Check oil level and dirt in oil
Please contact your
Canycom distributor
for inspection
Inspection/replacement:
See page 25
There must be no
marked oil leakage.
There must be no fuel
leakage.
There must be no loose
or missing mounting
bolts or nuts.
Oil level must be correct.
There must be no marked
Check the electrode for wear and
carbon accumulation.
Disengage the clutch while idling, and
check for abnormal noise.
Engage the clutch gradually to check
starting condition.
There must be no abnormal noise, and
the clutch must be disengaged.
Move the gear shift lever to the forward or
reverse gear shift position, and drive.
Check the transmission under operating
conditions for disengagement of gears,
abnormal noise, and abnormal heating.
Check the oil level in the case.
Check for fuel leakage from fuel
tank, injection pump, hoses, pipes.
Engine
compression
Engine
mount
Lubrication
system
Inspection
interval
Inspection
interval
M
on
th
ly
An
nu
al
ly
C
he
ck
s
be
fo
re
st
ar
tin
g
En
gi
ne
p
ro
pe
r
If the engine is operating abnormally,
or if the exhaust condition at idle
or at high RPM is abnormal, check
the engine compression.
If you hear valve noise or
the engine is not running
smoothly, check valve clear-
ance.
No cracks or deformities.
Check engine base for cracks or
deformities.
Shift the gears, and check
the clutch for ease of
disengagement.
There must be no slippage,
and the disengagement must
be smooth.
Check the belt for cracking,
damage, and contamination.
The transmission must operate
normally, and no
disengagement of gears,
abnormal noise, or must occur
abnormal heating
The oil level must be normal.
Inspection/replacement:
See page 26
Inspection/replacement:
See page 26
Inspection:
See page 31
Adjustment:
See page 31
Adjustment:
See page 31
Inspection/cleaning:
See page 29
Ignition plug
El
ec
tri
ca
l
sy
st
em
Check for oil leakage from the periphery
of the case.
Check oil for contamination.
There must be no excessive
contamination.
There must be no oil
leakage.
