11
Names and Functions of Each Part
How to Operate
Control Dial
The Control Dial is a multi-functional device located behind the LED Indicator on the right side of
the front bezel. It has three movements-rotate upward, rotate downward and press inward as a
button.
1.Power On/Off
Press the Control Dial to power the unit on from the off stage (the LED is off). To turn the power
off, press the Control Dial and hold for at least 1 second until the LED turns off.
2.OSD Control
While the monitor is on (green LED and image on the screen),Pressing on the Control Dial
activates the OSD. While the OSD menu is active, use the three way movements of the Control
Dial to adjust the monitor.
Rotate Downward: Move Up/Right, Increase, Larger, More
Rotate Upward: Move Down/Left, Decrease, Smaller, Less
Button Press: Execute, Do, Save
LED Indicator
This LED indicator turns green when the power is switched ON and the power cord is properly
attached. It turns amber when the monitor goes into a power saving mode (Active Off). Please
refer to the Power Management section of manual for more information.
