manualshive.com logo in svg

Canvys FP4200-OR, User Manual, Page: 15 / 40

Share
Download
Canvys FP4200-OR User Manual Download Page 15

13

⑤

 AC inlet:

 Connect the attach AC cord to the inlet (See accessory box for cable).

⑥

 CVBS Video input/output connector:

 Composite signal input. (See accessory box for 

cable).

⑦

 Component/RGBS input/output connector:

 When using component input to watch a DVD, 

HD (High Definition) or RGBS video image. The component video connector cable is connected 

to this and a component output video device. (See accessory box for cable).

⑧

 S-Video input/output connector:

 S-Video signal input. (See accessory box for cable).

⑨

 Analog input connector VGA:

 Analog video signal input. The analog signal cable is plugged 

into this.

⑩

 Digital input connector DVI

: Digital video signal input. (See accessory box for cable).

⑪

 Digital input connector HDMI:

 Digital video signal input. The provided digital signal cable is 

plugged into this. (See accessory box for cable).

⑫

 Control input connector GPIO DIN-9

⑬

 Calibration connector USB:

 Connect with PC to calibrate Gamma curve.

Summary of Contents for FP4200-OR









































Reviews:

No comments