DOVER 30” (76.2 CM) BATHROOM VANITY
10
BEFORE YOU BEGIN ASSEMBLY
CAM LOCK SYSTEM OPERATION
NOTE
: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN
BE WIPED OFF WITH DAMP CLOTH.
Insert dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.
GLUE
X
X
1
4
3
2
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw cam bolt into the pre-drilled small holes on panel. Align the panels to be joined
so that the cam bolt goes into the pre-drilled hole on the edge of the second panel and
protrudes into the hole that will house the cam lock.
2. Insert the cam lock into pre-drilled large hole on panel. Make sure arrow on the cam
lock is pointed toward the cam bolt.
3. Once the cam bolt is connected inside cam lock, take a cross-head screwdriver and
tighten the cam lock by turning clockwise.
You are now ready to assemble the product.