background image

11

MODEL NO. 085-1558-6

                     L-FT1109PST-B

LIMITED WARRANTY

Made in China

Subject to the conditions set out below, this product is warranted to the original purchaser 
to be free from defects in workmanship and materials for one (1) year from the date of pur-
chase.

    

Satisfactory proof of the purchase date must be furnished at the time of notification of the 

defect for any claim under the warranty to be enforceable. 

    

This warranty covers all parts found defective in workmanship and/or materials during the 

warranty period and can be repaired or replaced at the discretion of the manufacturer at no 
cost to the original purchaser.  

    

This warranty will be void if the product has not been assembled, installed or operated 

according to the instructions, or subjected to abuse, improperly treated, neglected, rusted 
by exposure to the elements, misused and/or if any repairs, maintenance, or service has 
been done by an unauthorized person.  

    

Returns must be properly packaged and returned to the dealer from whom the product 

was acquired. 

    

The manufacturer, distributor and retailer will not be liable for any incidental or conse-

quential loss or damage arising from the installation or operation of the product and/or the 
failure of any part for any reason.  

    

There are no other express or implied warranties, except for those stipulated herein. This 

warranty gives specific rights and the original purchaser may have additional rights and 
remedies in law.  

    

This warranty does not cover commercial use.

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8.

Summary of Contents for 085-1558-6












Reviews: