WALDON 60” LED MEDIA FIREPLACE
41
To set the thermostat temperature: Press the heater button multiple times to cycle
through the temperature settings: 37°C (99°F ) -> 30°C (86°F ) -> 28°C (82°F ) -> 26°C
(78°F ) -> 24°C (75°F ) -> 22°C (71°F ) ->OF (for use without heating). After you release
the heater button, your preferred setting will be flashing. Once it stops flashing, and
the display goes dark, then the thermostat will be set at your preference (and kept in
memory).
To turn OFF the heater while keeping the flames ON: Press the heater button until you
see “OF” in the control panel display (1). This indicates the heater is OFF. Flame settings
and other features continue to operate as normal.
Heater Lock (safety feature): To lock the heating function in the OFF position, with the
main power button (6) on, press and hold the
flame
control button (5) for five seconds.
The temperature display flash several times to indicate that the heater function is locked.
In this mode, there is no heating function but only normal
flame
control operation.
To unlock the heating function, press and hold the
flame
control button (5) for five
seconds. The temperature display flash several times and then normal heating function
mode is turned on.
NOTE: After the heater function or power is shut off, the blower will continue to run
for several minutes to cool the internal components.
Using the light control
Press the flame control button (5) multiple times to cycle through the five different
color of flame: L1_Blue, L2_Purple, L3_Green, L4_Auto-cycle and L5_Red.
Regardless of the previous flame setting, when powered off by the main power button
(6), the flames will come on in L5 mode (Red) when you turn the heater on.
INSTRUCTIONS FOR USE
1
2
4
5
6
1
5
Summary of Contents for 064-4020-6
Page 50: ......
Page 100: ...MC D INSPIRATION CANADIENNE ...
