46
EN
HOW TO USE THE ADVANCED FUNCTIONS
ECO
Note:
This function is only available under COOL mode.
•
Used to enter the energy efficient mode.
•
Under cooling mode, press this button, the remote control-
ler will adjust the temperature automatically to 24°C, fan
speed of Auto to save energy(but only if the set temperature
is less than 24°C). If the set temperature is above 24°C ,
press the ECO button, the fan speed will change to Auto,
the set temperature will remain unchanged.
•
Note:
Pressing the ECO button, or modifying the mode or
adjusting the set temperature to less than 24°C will stop
ECO operation.
•
Under ECO operation, the set temperature should be 24°
C or more. It may result in insufficient cooling. If you feel
uncomfortable, just press the ECO button again to stop it.
SLEEP function
The SLEEP function is used to decrease energy use while you
sleep (and don t need the same temperature settings to stay
comfortable). This function can only be activated via remote
control.
For the detail, “see sleep” operation in “USER S MANUAL”.
FOLLOW ME
The Follow me function enables the remote control to measure
the temperature at its current location and send this signal to the
air conditioner every 3 minutes interval. When using AUTO,
COOL, or HEAT modes, measuring ambient temperature from
the remote control (instead of from the indoor unit itself) will
enable the air conditioner to optimize the temperature around
you and ensure maximum comfort.
Silence function
Hold down Fan speed button for 2 seconds to activate/cancel
Silent mode. Due to low frequency operation of compressor, it
may result in insufficient cooling and heating capacity. (applica-
ble to the air conditioner with Silent feature only)
Hold down Fan
button for 2 sec-
onds to activate
Silence function.
Press this button
twice in one
second to activate
8°C heating
function.
8°C Heating Function
When the air conditioner operates under heating mode with the
set temperature of 16°C, press Temp button twice in one second
will activate 8 Degree heating function. The unit will operate
at a setting temperature of 8°C. The indoor unit display shows
“FP”.
Mode
Mode
Fan
Fan
ON/OFF
ON/OFF
Timer
Timer
LED
Self
clean
Turbo
Timer
Timer
LED
Turbo
Self
clean
Follow
me
Follow
me
The SLEEP function is not available in FAN or DRY mode.
NOTE: