26
27
REMOTE CONTROL BUTTONS
1.ON/OFF
The machine starts by pressing once and shuts down by
pressing again.
2.MODE (page 10)
Each press changes the level one step forwards in the following
order:
AUTO
COOL DRY HEAT FAN
3.SWING (page 11)
Adjusts the horizontal air deflector or directs the air flow up/
down. Each press changes the air deflector 6 degrees. To use
the automatic swing function press the button for more than 2
seconds.
4.SWING
(page 11)
Adjusts the vertical air deflector or directs the air flow right/left.
Each press changes the air deflector 6 degrees. Pressing the
button for more than 2 seconds activates the automatic swing
function. If the swing function is shut down “LC” is shown in the
display for 3 seconds.
5.SLEEP/FRESH (page 12)
Starts/stops the SLEEP function. Activates the FRESH function
by pressing the button for more than 2 seconds, switch it off in
the same way.
6.TURBO/SELF CLEAN (page 13)
Starts/stops the TURBO function. Start/stop SELF CLEAN by pressing the
button for more than 2 seconds; switch it off in the same way.
7.RESET
All user settings are lost and the unit reverts to its default settings.
8. UP (+)
Raises the temperature.
9. DOWN (-)
Lowers the temperature.
10.SILENCE (Extra quiet mode) / FP (low temperature function)
(page 14)
11. FAN SPEED
Four fan speed settings.
(Auto means that the unit determines the appropriate fan speed itself.)
AUTO
LOW
MEDIUM HIGH
12. TIMER ON (pages 14/15)
Starts the timer and every press of the button changes the time by 30
minutes or, after 10 hours, by a 1 hour interval.
13. TIMER OFF (pages 14/15)
Starts the timer and every press of the button changes the time by 30
minutes or, after 10 hours, by a 1 hour interval.
14. LED/FOLLOW ME (page 13)
To activate/deactivate the display on the indoor unit. Pressing the button for
more than 2 seconds activates the FOLLOW ME function; deactivate it in
the same way.
15.LOCK
Pressing the LOCK button locks all settings and the other remote control
functions cannot be used. To deactivate press LOCK again.
REMOTE CONTROL DISPLAY
Transmission symbol
Lights when the remote control is transmitting signals to the
indoor unit.
Mode (page 10)
Displays the current mode: AUTO (automatic switching
between heating and cooling)
COOL
DRY (Dehumidification)
HEAT
FAN
Temperature/Timer (page 15)
Displays the temperature 17 °C – 30 °C.
In FAN mode no temperature is shown in the display.
In Timer mode timer on/off is displayed.
Fan speed
Displays the current fan speed: low, medium, high
In AUTO fan mode no bar graph is displayed
The fan speed cannot be changed when the unit is operated
in Auto and Dry modes
ON/OFF
To activate/deactivate the display on the indoor unit.
LOCK
Lights when the function is active.
FOLLOW ME (page 14)
Lights when the function is active.
SLEEP (page 12)
Lights when the function is active.
For more information about functions read the
page referred to after each button.
1
2
4
5
3
9
10
8
6
7
11
12
13
14
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OFF
SWING
F
auto cool
dry
heat fan
silenc e sleep
follow me
lock run
SET TEMP. TIMER ONOFF
SILENCE (page 14)
Lights when the function is active.
EN
EN
