10
USING THE PRODUCT
(The photos below are only intended as illustrations and may therefore differ slightly in appearance from your product.)
REMEMBER
1. Insert the hose in the intake socket at the front of the vacuum cleaner, push it into the
bayonet fitting and turn clockwise to secure it (Fig. 1).
2. Insert the telescopic tube into the handpiece (Fig. 2).
3. Fit a nozzle that is suitable for the task: Combi nozzle for rugs or floors (choice of settings to
suit surface) (Figs. 3 and 4); brush nozzle for sofas, walls, curtains, corners, etc.; crevice nozzle
for narrow spaces.
4. Start the vacuum cleaner: plug the power cord into the wall socket and press the on/off switch
(Fig. 6).
5. To wind up the cable, hold down the button marked with the plug symbol (Fig. 7).
6. The floor nozzle can be stored on the hanger at the rear of the vacuum cleaner when the
machine is not in use (Fig. 8). There is also a hanger underneath the vacuum cleaner to permit
upright storage.
1.
3.
4.
2.
5.
6.
7.
8.
