38
English
menu item „Wireless Setup“ [WIS] using the arrow keys „ “ / „ “ and confirm
with „OK“.
2
Confirm the first menu item Wireless Pairing [WSP] with the „OK“ button. Then
select the speaker to be connected using the arrow keys „ “ / „ “ and confirm
your selection with the „OK“ button, too.
3
After
„Pairing“
is shown on the TV screen and [PIR] is indicated in the display,
plug in the power cord of the (new) speaker to be connected into the power
outlet and turn on the power switch (if present). After successful pairing the
On-screen display shows „connected“ and the diplay of the Sounddeck 100
as well as the display on the slave speaker indicate [CON].
Note:
• In a wireless home theater set, Sounddeck 100 is always the „master speaker,“
and all other speakers are defined as „slave speakers.
AUTOMATIC UPDATES
After you have connected the Sounddeck 100 to the network, firmware updates are
executed. After each connection to the power supply and at regular intervals (also
in standby), Sounddeck 100 searches for an update and installs it, if available. The
LED flashes green / red during the update and the display first shows „DOWNLOA-
DING“, then „UPDATING“. During this time the system is not ready for operation.
Caution:
Do not disconnect the Sounddeck 100 from the power supply during an
update process.