120
English
To establish a (wireless) connection between the Connect 5.1 and (Smart) speakers, please do the following:
1
Caution: Before starting the pairing process, the speaker to be paired (slave speaker) must have been disconnected from the mains for at
least 30 seconds. Please unplug the power chord from the mains or switch the speaker off using the power switch.
2
To enter the menu, press and hold the input select key " " for at least 3 seconds.
3
Use the "+" resp. the "–" key to select the menu item Output Setup [OPS] and confirm with the "Play/Pause" button " ".
4
Use the "+" resp. the "–" key to select the menu item Speaker Mapping [SPM] and confirm with the "Play/Pause" button " ".
5
Use the "+" resp. the "–" key to select the speaker that you want to adjust and/or pair and confirm with the "Play/Pause" button " ".
If you did not set a speaker or pair of speakers to Smart in the Speaker Config menu [SPC], this option will not be available and Wireless
can not be selected.
6
Use the "+" resp. the "–" key to chose between Wireless (if available) and Analog (Analog 1 - Analog 6). If you want to use an active
speaker system or a passive speaker with an amplifier you can exit the menu after selecting the output by pressing the input selection key
" ".Please repeat this step for all "not Smart" speakers.
7
If you want to connect your Smart speaker completely wirelessly (audio and control commands) please select "Wireless". If you want to
connect the speaker using an RCA-cable please select one of the outputs Analog 1 to Analog 6. The abbreviations behind Wireless have
the following meanings:
•
Wireless (DIS) = Smart speaker not connected (Disconnected)
•
Wireless (PIR) = Smart speaker pairing started (Pairing)
•
Wireless (CON) = Smart speaker connected
8
Pressing the "Play/Pause" button " "
guides you to the pairing process. The indication on the screen changes from Wireless to Wireles-
s(PIR). The info bar on top of the menu changes from "Wireless pairing press OK" to "Pairing in process". The display shows the selected
speaker.
9
Connect the speaker you want to pair to the mains and – if applicable – switch this speaker on at the power switch within 20 seconds.
It does not matter if the speaker remains in stand by mode or if it starts up after you connected it to the mains.
10
After a few seconds a successful wireless pairing will be indicated with Wireless(CON) behind the selected speaker on the screen.
The newly paired Smart speakers shows [CON] in its display. From now on the displays of the Smart Connect 5.1 and the paired Smart
speaker are in sync and show the selected speaker. The infor bar on top of the menu shows "Pairing successful".
11
The Connect 5.1 automatically jumps to the next speaker in the list after a successful pairing. Please repeat the steps 7 to 10 to connect
additional speakers.
12
Exit the menu item by pressing the Input-button " ".
