The UltraDuo Z2 can be connected to most external video equipment that
utilizes standard RCA Inputs. You will need to purchase the AV Cable in order
to continue this process.
Visit cansonic.com to purchase the correct AV Cable.
Connect the AV Cable to your UltraDuo Z2 and the external device. Once you
have done so, turn on the UltraDuo Z2 and the external device. The UltraDuo
Z2’s screen will appear blank as the image is shown on the external device.
The LED light shows the UltraDuo Z2 is on.
Remember to charge the UltraDuo Z2 prior to AV OUT mode since the AV
cable will NOT charge the battery. If you are going to use the UltraDuo Z2
longer than the internal power battery life, use the supplied USB cable and a
standard 5Vdc/USB power adaptor to keep it charged.
Note:
Be sure that the external power source of the power adaptor is 5Vdc
output in order to avoid damage to the UltraDuo Z2.
This damage is not covered under the manufacturer’s warranty.
27
VIDEO & AUDIO OUTPUT
