Page:
3/9
Zodiac LITE Installation Instructions
May 2008
!
Rev 1.5
Introduction
The Zodiac LITE biometric fingerprint reader allows all programming and user management to take place right at
the reader, without having to run cables to a PC. Up to 90 user templates can be stored in the reader’s non-volatile
memory. When used with a power supply and a door control module, this reader becomes the focal point of a 100
per cent PC-free, stand-alone door access control system.
Specifications
*
ZODIAC LITE READER
Power Requirements:
........................................................................................................................... 12 VDC, 300 mA
Wiegand Cable:
................................................................................. 22 AWG, 6 conductors, Stranded, Overall Shield,
Maximum 152 m (
500 ft
) to controller
Reader Output:
Reader Mode: .................................................................................................. 26-bit or Cansec 37-bit Wiegand
DCM
Mode
.................................................................................................
Cansec proprietary DCM Wiegand
Operating Temperature:
.................................................................................................... -15°C to 60°C (5°F to 140°F)
Size:
.........................................................
87
mm (w) x 144 mm (h) x 38 mm (d) [3.4 in (w) x 5.7 in (h) x 1.5 in (d)]
Weight:
........................................................................................................................................................... 397 g (14 oz)
Housing:
.................................................................................................................................................. High impact ABS
Mounting:
................................................................................................................................... Single-gang electrical box
Sensor:
Manufacturer:
............................................................................................................................................ Nitgen
Type: ......................................................................................................................................................... Optical
Authentication: ................................................................................................................................... <1 Second
LED Indicators:
................................................................................................................. Bi-colour standard (red, green)
1 x authentication indicator (left)
1 x externally controlled indicator (right)
Audio Tone:
............................................................................................................................................... Internal beeper
ZODIAC DOOR CONTROL MODULE
Power Requirements:
..............................................................................................................................12 VDC, 50 mA
Operating Temperature:
................................................................................................. -40°C to 85°C (-40°F to 185°F)
Size:
...........................................................
36
mm (w) x 61 mm (h) x 10 mm (d) [1.4 in (w) x 2.4 in (h) x 0.4 in (d)]
Weight:
.............................................................................................................................................................. 28 g (1 oz)
Lock Relay (on ZDCM)
Arrangement:
................................................................................................................................................. Form C
Nominal Switching Capacity:
................................................................................................................ 2 A, 30 VDC
*Specifications subject to change without notice
