Configuration & Wiring
ANTENNA, JP3 AND RELAYS 1&2
A:
ANTENNA CONNECTOR
“F” Type, 3/8” – 32
B:
JP3
[
Default
position: Jumper 1 & 3
OUT
(pins not shorted); jumper 2
IN
(pins
shorted) ]
JUMPER 1
OUT = On-board Beeper disabled
IN = On-board Beeper enabled (sounds when valid data is received)
JUMPER 2
OUT = Accepts SF200 Transmitters only (binary stream support)
IN = Accepts SFR100 or SFR200 transmitters (SF100 Mode)
JUMPER 3
N/A = Reserved for future use.
Smartfob Receiver MN: SFR2RXB
Page 6 of 17
Installation Manual
July 2008 • Rev. 1.0
