Delivery content:
1. Shipping packaging
2. CANOR DAC 2.10 D/A converter
3. Power cord
4. Remote control (containing CR2032 batteries)
5. User guide
Caution!
The Waste Electrical and Electronic Equipment Directive - Regulation of the European Union 2002/96/EC
governing the issue of separate waste collection.
This device may not be disposed of in unsorted municipal waste. Devolve the appliance upon a collection centre
for recycling and disposal of electrical and electronic equipment waste. Correct disposal of waste does not cause
negative impacts on the environment and human health. You will thus contribute to protection of the
environment.
Remote Control
CR2032 battery is installed inside your remote control and one more spare battery is supplied.
Do not expose the sensors of your remote control to direct sunlight or to other strong light sources.
Remote control operates at an angle of 60 ° to about 5 meters. Aim your remote control at sensor on the device.
There may not be any obstacles in the way between sensor and remote control.
If the appliance is placed behind glass, it may result in shortening the operating distance of a remote control
(according to the colour and strength of glass).
Keys on the remote control have the same function as the keys at the front panel of the device.
Remote Control Buttons:
ON/OFF =
DAC 2.10 turning on and off
INPUT - =
decrement selected input
INPUT + =
increment selected input
FILTER - =
decrement digital filter or enable/disable analogue filter in DSD mode
=
increment digital filter or enable/disable analogue filter in DSD mode
UPSAMPLE =
enable/disable up-sampling function
RECLOCK
= enable/disable re-clocking function
THEME
= switch display theme
OK
= enter to the menu/submenu or activate selected item
ARROW UP
= enter to the menu or move up in the menu
ARROW DOWN
= enter to the menu or move down in the menu
ARROW LEFT
= enter to the menu/submenu or activate selected item
ARROW RIGHT
= return from previous submenu or return to main view
Front Panel Buttons:
MUTE
= mute/unmute audio output
DIMMER
= set desired brightness of display
ENTER
= enter to the menu/submenu or activate selected item
BACK
= return from previous submenu or return to main view
ENCODER KNOB
= rotate to browse and select item or push encoder to enter to the menu/submenu
or activate selected item
Summary of Contents for DAC 2.10
Page 1: ......
Page 8: ...www canor audio com...
