background image

7. Ventilation - equipment should be placed so that it guarantees it a good airflow. This means 
that it must not lie on the sofa or upholstered furniture, in the working condition it must not be 
covered. It would then prevent proper air flow around the vent holes of device.  
8. Heat – the device must be located so as to avoid the heating from heat sources, for example 
heaters or stoves or other heat-producing equipment. The distance from the rear wall of the 
device may not be less than 20 cm, and 20 cm above the area of the compact disc player  may 
also be no obstacle. Along side the equipment should be ensured min. distance of 20 cm from 
other objects. 
9. Power source - the device must be connected only to a power supply, for which it is 
designed.  
10. Power cord - it is necessary to pay particular attention to a power cord, it must be 
positioned so as to avoid stepping on it and to ensure it is protected against mechanical 
damage.  
11. The longer the period during when you do not use the CDP you should disconnect the 
power cord from the mains supply, or at least turn off the main power switch located at the 
rear of the device.  
12. Subjects containing liquid - do not place these objects (vases, flower pots), so that they 
can fall on the device, possibly a fluid could leak out of them on the CDP.  
13. Damage requiring service - equipment should be repaired only by qualified service  once:  
a) power cord is damaged 
b) the device fell into water or was poured  
c) the device was exposed to rain  
d) the device works incorrectly   
e) the device fell to the ground or is otherwise mechanically damaged.  
14. Repairs - all repairs must be entrusted to qualified service.  
15. General warning - use the device only in accordance with the instructions.  

To help you avoid an electric shock, do not expose the amplifier to rain or 
moisture!

 

 
This CD player is classified as CLASS 1 LASER PRODUCT. It can emit radiation in the 
range of CLASS 1 limit. 

Do not disassembly - danger of damage to eyes!

  

 

Delivery content

 

 

1.shipping packing 
2. CANOR CD2 VR compact disc player  
2. Power cord  
3. Remote control (containing AAA batteries - 2 pcs)  
4. CANOR CD2 VR User Guide   
 

Summary of Contents for CD2 VR










Reviews: