Canor AI 2.10, User Manual

Page: 4 / 6

Remote Control
Insert two AAA-sized batteries into your remote control and take care of polarity.
Do not expose the sensors of your remote control to direct sunlight or to other strong light sources.
Remote control operates at an angle of 60 ° to about 5 meters. Aim your remote control at sensor on the device.
There may not be any obstacles in the way between sensor and remote control.
If the unit is placed behind the glass, it may result in shortening the operating distance of a remote control
(according to the color and strength of glass).
Keys on the remote control have the same function as the keys at the front panel of the device.
Remote control is equipped with features for the amplifier and a CD player:
- function for amplifier only /volume control keys/
←
INPUT
→ function for amplifier only /inputs switching/
AMP ON/OFF - function for amplifier only /turning on and off the amplifier /
Large power button - turns off both amplifier and CD player at once
Functions of CD player only:
CD ON/OFF
-CD player turning on and off
Numeric keypad (0-9)
–direct track selection
Numeric key 0 - CD1.10 inputs selection: 1.CD, 2.COAXIAL, 3.OPTICAL, 4.USB
Numeric 10 – you can pick tracks with a higher sequential number than 10
REPEAT – allows you to cyclically opt for single track repeat, entire disc repeat or disable repeat
BACKWARD |<< - when pressed for a short time it jumps to the beginning of a track if playback time lasts
longer than 5 seconds ,further pressing results in jumping one track back. When pressed for a longer time
playback moves smoothly backwards
FORWARD >>| - when pressed for a short time it jumps one track forward, when pressed for a longer time,
playback moves smoothly forwards
OPEN
– closing and ejecting
STOP
–ceases CD disc playback
PLAY/PAUSE
–resumes and pauses CD disc playback
FRONT PANEL
contains a button with additional function unlike remote control:
MUTE – pressing this button results in an instant muting of the volume. Subsequent pressing results in default
volume
DIMM - sets the display brightness in six steps whereby 0 is a turned off display, and 5 is maximum brightness.
After turning on, the display brightness level is 3 and by repeated pressing or holding the button, brightness
lowers to values 2,1,0 and continues to rise until maximum brightness (5) is reached, and repeatedly lowers until
display is turned off. In state of a turned off display during operating the device with function keys the display
lights up to brightness 2,and after afew seconds the display turns off again.
European Community Directives
This product is designed and manufactured in order to comply with existing laws of the European Community.
This product is certified by testing laboratory and bears the CE mark.