Step 1
Step 2
Step 4
EASY FRAME LAYOUT
First, layout all the frame parts
exactly as shown in diagram 1.
Next, combine all the parts
listed below to form the frame,
starting with the center peak,
and then assemble each side.
12 - #13001
(41" Straight Tubes)
12 - #13005
(41" Swedged Tubes)
6 - #13003
(25 3/4" Swedged Tubes)
6 - #10063
(3-Way Frame Connector)
3 - #10064
(4-Way Frame Connector)
13001
13001
13005
13005
13003
10063
10064
10063
Place cover over frame with
the grommets facing downward
allowing the valance to wrap
around and cover the eaves of
the frame.
#13002 to leg
Straight tube
#13004
Top leg
of tube
FACE ALL PUSH
BUTTONS
DEVICES DOWN
FACE ALL PUSH
BUTTONS
DEVICES DOWN
05-25757 11/28/03 Pg.2
Swedged tube
Diagram A
Diagram D
Diagram B
Diagram C
Diagram E
Note:
Face all push button
devices, located on the metal
tube, in a downward direction.
FRAME ASSEMBLY
Step 3
Connect one each of part
# 13002 and # 13004 then set
set them aside for now.
ubes with
6 - #13002
(41" Straight T
6 - #13004
(40" Swedged Tubes for
extra hole for top of leg
bottom of leg)
)
(See Diagram D)
POLE ASSEMBLY
Note:
Face all push buttons
in a downward direction. (They
are located on the metal tube)
05-25757 11/28/03 Pg.2
(See Diagram A)
(See Diagrams B & C )
(See Diagram E)
