96
Editing
E
Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
❍
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SP
mode 12-bit audio sound using the analog line-in function.
❍
Do not connect/disconnect any cable to/from the camcorder while dubbing.
❍
You cannot use the DV terminal for audio dubbing.
❍
If you add sound to a tape not recorded with this camcorder, sound quality
may decrease.
❍
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
Connecting an Audio Device
❍
Make sure that “
H
” is not displayed on the screen. If “
H
” is displayed, change
the setting (
39).
❍
You can monitor the picture on the LCD screen or a TV connected via the
S-video terminal, and check the sound with the built-in speaker.
AV
R
L
Signal flow
STV-250N Stereo Video Cable
(supplied)
