Canon ZR45 MC Page 76 Instruction Manual Download

Page: 76 / 164

Using the Full

Range of Features

Ajusting AE Shift

By controlling the level of the automatic exposure (AE) function, you can lighten
or darken the image slightly. This allows you to compensate for backlit,
overexposed scenes.

AE SHIFT

Make sure the program selector is set to

1. Press the selector dial in and select any recording program other

than Spotlight, Sand & Snow or Night from the program menu.

2. Press the AE SHIFT button.

•

AE appears light blue.

3. Turn the selector dial to choose your desired level.

• Levels are from –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75).
• The higher the setting, the brighter the image.

CAMERA

CARD

CAMERA

TAPE

Notes:

• You cannot adjust the exposure without the

mark before AE in the display.

Push the AE SHIFT button so that

appears before AE. Then you can adjust

the exposure manually.

• You cannot adjust the AE Shift when the camcorder is set to

[

(Easy

Recording), the Spotlight, Sand & Snow or Night recording program.

Summary of Contents for ZR45 MC





































































































































































Search results

Summary of Contents for ZR45 MC

Reviews:

Related manuals for ZR45 MC

Brands by name

Popular brands

Canon ZR45 MC, Instruction Manual

Search results

Summary of Contents for ZR45 MC

Reviews:

Related manuals for ZR45 MC

Brands by name

Popular brands