Editing
E
87
Dubbing
1. Find a point on your recorded cassette slightly before the section you want to copy and set
it to playback pause mode.
2. Press the camera’s REC PAUSE button.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the picture.
4. Press the play/pause
e
/
a
button on the camera body or the PAUSE
a
on the wireless
controller.
• Recording starts.
5. When you get to the point where you want to stop recording, press the stop button or the
pause button.
• Recording stops.
6. Stop playback on the other device.
Notes:
• If the cable is not connected properly, or if the cable is unconnected when you press REC PAUSE, the
camera displays the caution ‘‘CHECK THE DV INPUT.’’ An anomalous image may also flash onto the
screen.
• Blanks between recordings on the playback tape are recorded as anomalous images on the tape that is
being recorded to.
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play back such a cassette,
“COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears in the viewfinder for a few seconds
and then the camera displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable “COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears in the viewfinder; you cannot record the contents of the tape.
