Canon XF705, Instruction Manual

Page: 123 / 231

123
Cu s tom Picture S etting s
Copying Cu s tom Picture File s
You can transfer custom picture files between the camcorder and SD card B.
Copying a File from the Camcorder to SD Card B
1 Insert a card into the camcorder’s SD card slot B.
2 Select a custom picture file (
A
121).
3 Select [Copy to SD Card B].
>
[
/
!
Custom Picture]
>
[File]
>
[Copy to SD Card B]
4 Select the destination file and then press SET.
• Select an existing custom picture file to overwrite it or [New File] to save the settings as a new custom
picture file on the card.
5 Select [OK] and then press SET.
• The file on SD card B will be overwritten or a new file will be created on the card.
6 When the confirmation message appears, press SET.
Replacing a File in the Camcorder with a File on SD Card B
1 Insert the card with the desired custom picture file into the camcorder’s SD card slot B.
2 Select an unprotected custom picture file that you wish to replace (
A
121).
3 Select [Load from SD Card B].
>
[
/ !
Custom Picture]
>
[File]
>
[Load from SD Card B]
4 Select the file with the settings that you want to replicate and then press SET.
5 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on SD card B.
6 When the confirmation message appears, press SET.
Embedding the Cu s tom Picture File in Clip s
After adjusting the various settings, you can record the custom picture file in use together with the clip’s
metadata. When a clip has an embedded custom picture file, you can check the settings used to record the clip
on the [Clip Info] screen (
A
138).
1 S elect [Add
/
File].
>
[
3
"
Recording/Media Setup]
>
[Metadata]
>
[Add
/
File]
2 S elect [On] and then pre ss S ET.
• When [Off] is selected, the custom picture file is not recorded with the clips.