Handy Tricks
1.
The ND FILTER switch on the left side of the camera behind the iris ring can be used to darken a
picture that is too bright, like a sunny outdoor scene.
2.
The ZEBRA button behind the ND FILTER can be used to give you a visual warning when your
picture is too bright. Objects in the viewfinder with zebra stripes over them may be overexposed.
3.
If the camera will not be mounted on a tripod, consider turning on the Image Stabilizer. Detailed
instructions can be found on page 62 of the instruction manual.
Connecting External Audio
Detailed audio instructions can be found on page 91 of the instruction manual.
1.
Plug your microphone's XLR cable into the appropriate XLR jack on the right side of the camera.
2.
Set the AUDIO IN switch above the XLR jacks to EXT for the channel you connected to.
3.
On the front of the XLR input block, select the appropriate mic setting for your microphone. You will
only need to use the MIC+48v setting if you have a condenser mic that requires phantom power.
4.
Mic level controls are located on the left side of the camera next to the battery compartment. These
controls can be set to automatic or manual control with the switches located next to the level controls.
Troubleshooting
See page 186 of the instruction manual for full troubleshooting tables.
1.
Won't power on
◦
Check that the battery is charged and properly installed.
2.
The camera won't auto-focus
◦
Check that the focus selector on the left side of the camera is set to A and that the focus ring is
unlocked. The focus ring lock is directly behind the focus ring on the grip side of the camera.
Press the lock button and move the ring to AF/MF
Questions? Call 1-815-686-2687 or email [email protected].
For urgent technical support outside of business hours call 1-815-230-1911.
Canon XF300
Setup & Troubleshooting Instructions
Page 2 of 2
