S
low & Fa
s
t Motion Recording
44
Slow & Fast Motion Recording
You can record clips that have a slow motion or fast motion effect during playback, simply by selecting the
desired slow/fast motion rate. Available slow/fast motion rates will vary depending on the resolution and frame
rate currently selected. Sound is not recorded when slow & fast motion recording is activated.
1
S
elect [
S
low & Fa
s
t Motion].
>
[
3
"
Recording Setup]
>
[Slow & Fast Motion]
2
S
elect the de
s
ired
s
low & fa
s
t motion rate and then
s
elect [
X
].
• Select [
j
] to turn off slow & fast motion recording.
•
or
and the selected rate will appear on the right of the screen.
MP4 clip
s
: Available
s
low/fa
s
t motion rate
s
XF-AVC clip
s
: Available
s
low/fa
s
t motion rate
s
NOTES
NOTES
• Slow & fast motion recording cannot be used together with the following functions.
• While slow & fast motion recording is activated, the recording command signal will not be output from the
SDI OUT terminal (
z
only) or HDMI OUT terminal.
• About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [
Regen.], or to [
Preset] with [
Rec Run] running mode.
- If the time code running mode was set to [
Free Run], the time code running mode will be changed
automatically to [
Rec Run] when slow & fast motion recording is activated.
- When slow & fast motion recording is turned off, the time code running mode will return to its previous
setting.
- The time code signal cannot be output from the SDI OUT terminal (
z
only) or HDMI OUT terminal.
• The maximum continuous recording time of a single clip using slow motion recording is the equivalent of 6
hours of playback time. Recording will stop automatically after that. For example, when the [x0.5] rate is
selected, the maximum continuous recording time will be 3 hours (which, played back at x0.5 slow motion,
equal 6 hours of playback time).
This restriction does not apply to fast motion recording, which will not stop automatically.
Operating modes:
Resolution
Frame rate
Available slow/fast motion rates
3840x21
6
0
2
9
.
9
7P
x2, x4, x10, x20, x
6
0, x120, x
6
00, x1200
23.
9
8P
x0.8
1
9
20x1080
5
9
.
9
4P
x2, x4, x10, x20, x
6
0, x120, x
6
00, x1200
2
9
.
9
7P
x0.5
23.
9
8P
x0.4, x0.8
1280x720
5
9
.
9
4P
x2, x4, x10, x20, x
6
0, x120, x
6
00, x1200
Resolution
Frame rate
Available slow/fast motion rates
Playback bit rate
3840x21
6
0
2
9
.
9
7P
x2, x4, x10, x20, x
6
0, x120, x
6
00, x1200
1
6
0 Mbps
23.
9
8P
x0.8
150 Mbps
1
9
20x1080
5
9
.
9
4P
x2, x4, x10, x20, x
6
0, x120, x
6
00, x1200
45 Mbps
2
9
.
9
7P
x0.5
23.
9
8P
x0.4, x0.8
- Dual recording
- Relay recording
- Pre-recording
- Color bars
Summary of Contents for XA70
