Preparing the Camcorder
22
Using the LCD Screen
Open the LCD panel 90 degree
s
and adju
s
t the viewing
angle.
NOTES
• You can adjust the brightness and the backlight level of the LCD screen with the
>
[
£
Display
Setup]
>
[LCD Brightness] or [LCD Backlight] setting respectively. When the camcorder is on, you can also
press and hold the DISP button for more than 2 seconds to open the [LCD Backlight] setup menu.
• Adjusting the brightness does not affect the brightness of recordings.
• Using a brighter LCD backlight setting will shorten the effective usage time of the battery pack.
• When the LCD panel is rotated 180 degrees toward the subject, you can use the
>
[
£
Display
Setup]
>
[LCD Mirror Image] setting to flip the screen's image horizontally so it shows a mirror image of the
subject.
• For details about how to take care of the LCD screen, refer to
Safety Instructions and Handling Precautions
(
A
Cleaning
(
A
Using the Viewfinder
Adjust the position of the viewfinder to a comfortable angle. You can also adjust the diopter, if necessary.
1 Turn on the camcorder (
A
s
e the LCD panel.
2 Pull out the viewfinder and adju
s
t the viewing angle.
3 Adju
s
t the viewfinder u
s
ing the dioptric adju
s
tment lever.
햲
햳
햳
햳
햲
햴
Dioptric adjustment
lever
Summary of Contents for XA70
