Menu Options
122
[Output Status]:
Displays a screen where you can verify the standard of the output signal from the SDI
OUT (
only) terminal or HDMI OUT terminal.
[LCD Brightness]:
Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[VF Luminance]:
Sets the screen to one of four backlight levels (for the LCD screen) or
two luminance levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using a brighter backlight/luminance setting will shorten the effective usage time of the battery
pack.
[LCD Mirror Image]
: When this setting is set to [
i
On], this function reverses the image on the screen
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
• If the camcorder, optional remote controller or a commercially available remote control is operated
while the mirror image is displayed, the mirror image will deactivate temporarily for approximately 4
seconds.
[Output Onscreen Displays]:
When set to [
i
On], the camcorder’s onscreen displays will appear also
on the screen of a TV or monitor connected to the camcorder.
[HDMI Max
Resolution]
[3840x21
6
0]*, [1
9
20x1080], [1280x720(5
9
.
9
4P)]
*
mode
only.
[SDI Output] [1
9
20x1080], [1280x720(5
9
.
9
4P)]
[3G-SDI
Mapping]
[
Level A], [
Level B]
[SDI/HDMI Scan
Mode]
[HDMI Scan Mode]
[
P], [
PsF (Forced 1080i)]
[Output Status]
–
–
[LCD Brightness]
–
[LCD Backlight]
[
Max Brightness], [
Bright], [
Normal],
[
Dim]
–
[VF Luminance]
[
Bright], [
Normal]
–
[LCD Mirror Image]
[
i
On], [
j
Off]
–
–
[Output Onscreen
Displays]
[
i
On], [
j
Off]
–
[Onscreen Markers] [
j
Off], [
4
Level (Gray)], [
3
Level (White)],
[
6
Grid (Gray)], [
5
Grid (White)], [
4:3 (Gray)],
[
4:3 (White)]
–
–
[Distance Units]
[
.
meters], [
/
feet]
–
Menu item
Setting options
A