Audio Output
111
Audio Output
The camcorder can output audio from the SDI OUT terminal (
only), HDMI OUT terminal,
×
(headphone) terminal or speaker (monaural;
mode only). When recording or playing back clips
recorded with 4-channel audio, you can select the 2-channel output.
Audio output configuration
Selecting the Audio Channels for Headphone or Speaker Output
You can select the 2-channel output from the
×
(headphone) terminal or speaker.
1 Select [Monitor Channels].
>
[
¡ #
Audio Setup]
>
[Monitor Channels]
2 Select the desired option and then select [
X
].
• The options show combinations of audio channels output from the left and right (L/R),
respectively. Options with a “+” sign ([CH1+2], for example) indicate a mix of two audio channels
on the same side.
Selecting the Audio Channels for HDMI Output
The audio signal output from the HDMI OUT terminal will be 2-channel linear PCM audio (16-bit,
48 kHz sampling).
1 Select [HDMI Channels].
>
[
¡ #
Audio Setup]
>
[HDMI Channels]
2 Select the desired option and then select [
X
].
NOTES
• If you set an assignable button to [Monitor Channels] (
A
88), you can press the button to toggle
between the audio channel output options.
Audio configuration of the recorded clips
Audio output configuration
SDI OUT terminal
HDMI OUT terminal
4-channel linear PCM,
1
6
bit / 24 bit
4-channel linear PCM,
24 bit
2-channel linear PCM,
1
6
bit
2-channel AAC,
bit rate: 25
6
kbps
Operating modes: