Canon XA10 Page 94 User Manual Download

Page: 94 / 191

Playing Back Video

4 Touch the desired scene to play it back.

• Playback will start from the scene selected and continue until the end of the last scene in the

index screen.

• Touch the screen to display the playback controls. During playback, the playback controls will

disappear automatically after a few seconds without operation. In playback pause, touch the
screen again to hide the playback controls.

During playback:

Adjusting the volume

1 During playback, touch the screen to display the playback controls.

2 Touch [

], drag your finger along the [Speaker Volume]* bar to adjust the volume and

touch [

* When

[AV/Headphones] is set to [

Headphones], adjust the [Headphone Volume] bar

instead.

Jump to the beginning of the scene. Double-tap to jump to the previous scene.

Jump to the beginning of next scene.

Pause the playback.

Fast playback* backward/forward.

Display the volume (

94) and background music mix balance (

118) controls.

Stop the playback.

Decoration (

110).

* Touch several times to increase the playback speed to approximately 5x

→

15x

→

60x

the normal speed. During fast playback, touch anywhere on the screen to return to
normal playback.

Summary of Contents for XA10
































































































































































































Search results

Summary of Contents for XA10

Reviews:

Related manuals for XA10

Brands by name

Popular brands

Canon XA10, User Manual

Search results

Summary of Contents for XA10

Reviews:

Related manuals for XA10

Brands by name

Popular brands